PRODUCTS

J-Deck Inc. offers you a variety of Wall and Roof Panels and non-structural Nail Base Panels!

J-DECK INC. Structural Insulated Panels (SIPs)

  • Standard Structural Insulated Panels (SIPs)
    • 7/16” OSB – EPS (1lb, Virgin) – 7/16” OSB
    • Panel Sizes: 4′ Wide and Lengths up to 24′ Long
    • Core thickness 3 3/4”, 5 5/8”, 7 3/8”, 9 3/8”, 11 3/8”
  • Designer Structural Insulated Panels (SIPs)
    • Alternative Substrates:
      OSB Thickness, Plywood, T-111, Smart panel, Fire Rated Sheathing, Etc.
    • EPS Cores:
      Custom Thickness, Alternative EPS Weight, Etc.
    • Vented EPS

 

 

J-DECK INC. Tongue & Groove Clad – Structural Insulated Panels (SIPs)

  • 7/16” OSB – EPS (1lb, Virgin) – ¾” Tongue and Grove Pine
  • Sizes 45”x8’, 45”x9’, 45”x10’, 45”x12’
  • Core thickness 3 5/8”, 5 5/8”, 7 3/8”, 9 3/8”, 11 3/8”
Comparison of a standard OSB panel and a custom T&G pine roof panel
J-Deck Inc. Panel Displays in our Showroom
Inside view of SIP fastener through insulated panel to nail base
A Sample of Our J-Deck Inc. Connection Details for Nail Base Panels

J-DECK INC. Nail Base Panels (Non-Structural Panels)

  • Standard Non-Structural Insulated Panels
    • 7/16” OSB – EPS (1lb, Virgin)
    • Panel Sizes: 4′ Wide and Lengths up to 24′ Long
    • Core thickness 3 3/4”, 5 5/8”, 7 3/8”, 9 3/8”, 11 3/8”
  • Designer Non-Structural Insulated Panels
    • Alternative Substrates:
      OSB Thickness, Plywood, Fire Rated Sheathing, Etc.
    • EPS Cores:
      Custom Thickness, Alternative EPS Weight, Borite treatment, Etc.
    • Vented EPS

 

Spline Connectors (Connection between SIP Panels)

  • SIP Spline
    • 7/16” OSB – EPS (1lb, Virgin) – 7/16” OSB
    • Size 8’ Lengths
    • Spline thickness 3 1/2”, 5 1/2”, 7 1/4”, 9 1/4”, 11 ¼”
  • OSB Spline
    • 7/16” x 3” OSB
    • Size 8’ Length

J-Deck Inc. Recommended SIP Accessories

Estimates, Panels Design & Drawings, Coordinate Engineering Needs, Installation Lumber Take offs for SIP System, Job Specific Panel Fabrication, SIP System Shipping

Side view of Insulated LVL header for home or business construction

LVL SIP Header

J-Deck Inc. LVL SIP Header manufactured by J-Deck Inc. is composed of two 1 1/2” LVL sections laminated to an EPS foam core, providing continuous insulation surrounding openings in the building envelope. Header can be manufactured to clear spans of up to 16’. J-Deck Inc. LVL SIP Headers are light weight, cost effective, provide additional strength and are designed to be a perfect fit to every SIP panel, further contributing to the air tightness of the envelope.

  • Header Dimensions; Depth-11 3/4”, Span– 16’ (max. clearance) + 6” on either end (12” total for load transfer), Thickness– 3 3/4”, 5 5/8”, 7 3/8”, 9 3/8”, and 11 3/8”.
Side view of the LVL SIP I-Joist

LVL SIP I-Joist

J-Deck Inc. LVL SIP I-Joist distributed by J-Deck Inc. is composed of laminated veneer lumber flanges and oriented strand board (OSB) webs, and can be used as floor joists, roof rafters and blocking panels, to support code-required loads. Header can be manufactured to clear spans of up to 15’ for our 9 1/2” tall I-Joist. J-Deck Inc. LVL SIP I-Joists are structural elements with sound rating and fire-resistance properties and are designed to be a perfect fit to every SIP panel, further contributing to the air tightness of the envelope.

  • I-Joist Dimensions; Depth– 9 1/2” and 11 7/8” and Span– 16’.
Bucket of Structural Insulated Panel (SIP) Screw Fasteners

SIP Screw Fasteners

J-Deck Inc. SIP Screw Fasteners distributed by J-Deck Inc. are the ideal fasteners to use with the SIP construction method. SIPTP (Thread Point) screws are recommended for use with connection with wood structural elements and the SIPLD (Light Duty Drill Point) screws would be recommended for use with steel based structural elements.

  • Available in various sizes. Range from 3 1/2” – 15”.
Roll of SIP joint sealant tape

SIP Joint Sealant Tape

Vapor Tape from Sustant is a Low VOC, VLM SIP joint tape. This is a high tack, PSA synthetic adhesive bonds in all temperatures, provides permanent, flexible bond and is thin bodied for easy handling. J-Deck Inc. recommends using SIP Joint Sealant Tape on all Structural Insulated Panel joints to create an air tight building envelope.

  • Available in 4”, 6”, 12” and 18” widths and at a length of 75’ per roll.
Bottles of TYTAN spray foam adhesives and sealants

Spray Foam Adhesive and Sealants

TYTAN Professional® foam products offer a wide variety of applications. J-Deck Inc. recommends TYTAN Standard Expanding Foam, TYTAN Extreme Climate Expanding Foam, and TYTAN Subfloor Adhesive Foam.

  • Available in 24oz. (907 gram) – 29oz. (822 gram) cans.
20 FL OZ sausage tubes of Low VOC mastic sealing compound

Low VOC Mastic

J-Deck Inc. Sound/Draft Barrier distributed by J-Deck Inc. is a high quality latex-based sealing compound used as an essential component in construction assemblies for achieving and maintaining the required STC rating as per IBC 1207.2 for air-borne sound.

  • Available in 20fl.oz sausage tubes
Insulated panel house wrapped and ready for exterior application

Housewrap

Breathe EZ™ Plus MPL & MPH building wraps distributed by J-Deck Inc. is the best choice for severe weather protection, providing real-world resistance to moisture and is more surfactant-resistant than most building wrap materials. Both BreatheEZ™ Plus MPL & MPH meet or exceed applicable building codes for weather resistant barriers and are a critical component for a healthy, energy-efficient building. The housewrap is a crucial step in the weatherproofing of a building envelope.

  • Available in rolls of 9’ X 150’. *Housewrap tape will be provided with purchase of housewrap.
Share